Sandvik turning insert with CBN,PCD,and ceramic grade specifications
796Hits2014-03-01 08:44:34 Source:Sandvik turning insert
Sandvik turning insert with CBN,PCD,and ceramic grade specifications
Sandvik Coromant grade CB7015 (BN)- H10 (H05 - H15)
High performance and low rate of cubic boron nitride grade.Light load surface hardened steel high-speed continuous and discontinuous cutting is first choice.
Sandvik Coromant grade CB7025 (BN)- H15 (H10-H20)
High performance and low rate of cubic boron nitride grade. In the applications of hardened steel medium cutting speed, with more intermittent cutting and the rest for continuous cutting of first choice.
Sandvik Coromant grade CB7035 (BN)- H20 (H15-H25)
High performance and middle rate of cubic boron nitride grade. Medium cutting speed is overloaded continuous cutting of hardened steel under the preferred.In addition, but also has good abrasion resistance, can keep the long time of cutting.
Sandvik Coromant grade CB7525 (BN)- K05 (K01-K10)
Very hard Cubic boron nitride material . Has the very high cutting edge toughness and good wear resistance, making it become continuous and discontinuous cutting under the condition of high speed finish machining,it is the best choice of the grey cast iron.
Sandvik Coromant grade CB7525 (BN)- H25 (H20-H30)
Very hard Cubic boron nitride material . High edge line toughness makes it a good complement of cutting of hardened steel discontinuous material.
Sandvik Coromant grade CB7925 (BN)- K05 (K01-K10)
internal CBN material,with good cutting performance and wear resistance. CB7925 is suitable for continuous and discontinuous cutting conditions for grey cast iron
Sandvik Coromant grade CB20(BN)– H15 (H10-H20)
High performance cubic boron nitride grade. The continuous and intermittent light cutting hardened steel's first choice.
Sandvik Coromant grade CB50– H25 (H20-H30)
Very hard Cubic boron nitride material . High edge line toughness makes it a good complement of cutting of hardened steel discontinuous material.
CC670 (CA)– H10 (H05-H15)
Silicon carbide whisker reinforced alumina ceramic,Has a very high intensity.Recommended for adverse conditions turning of hard parts.
CC6050 (CC)- H05 (H01 - H10)
The composite alumina ceramic material. Has good heat resistance and abrasion resistance.It is mainly used for light load for finish machining.
CC6060 (CA)- S10 (S05-S20)
Aaron ceramics. for heat resistant hard alloy.Excellent groove wear resistance, and thus provides high security and predictability of wear.
CC6065 (CA)- S15 (S05-S20)
Aaron ceramics, first choice for all HRSA. Offer good resistance and safety. suitable for medium interrupted cutting and others.
CT5015 (HT)– K05 (K01-K10)
Non coating metal ceramic grade. with good chip resistance and plastic deformation resistance. used for finishing.
High performance and low rate of cubic boron nitride grade.Light load surface hardened steel high-speed continuous and discontinuous cutting is first choice.
Sandvik Coromant grade CB7025 (BN)- H15 (H10-H20)
High performance and low rate of cubic boron nitride grade. In the applications of hardened steel medium cutting speed, with more intermittent cutting and the rest for continuous cutting of first choice.
Sandvik Coromant grade CB7035 (BN)- H20 (H15-H25)
High performance and middle rate of cubic boron nitride grade. Medium cutting speed is overloaded continuous cutting of hardened steel under the preferred.In addition, but also has good abrasion resistance, can keep the long time of cutting.
Sandvik Coromant grade CB7525 (BN)- K05 (K01-K10)
Very hard Cubic boron nitride material . Has the very high cutting edge toughness and good wear resistance, making it become continuous and discontinuous cutting under the condition of high speed finish machining,it is the best choice of the grey cast iron.
Sandvik Coromant grade CB7525 (BN)- H25 (H20-H30)
Very hard Cubic boron nitride material . High edge line toughness makes it a good complement of cutting of hardened steel discontinuous material.
Sandvik Coromant grade CB7925 (BN)- K05 (K01-K10)
internal CBN material,with good cutting performance and wear resistance. CB7925 is suitable for continuous and discontinuous cutting conditions for grey cast iron
Sandvik Coromant grade CB20(BN)– H15 (H10-H20)
High performance cubic boron nitride grade. The continuous and intermittent light cutting hardened steel's first choice.
Sandvik Coromant grade CB50– H25 (H20-H30)
Very hard Cubic boron nitride material . High edge line toughness makes it a good complement of cutting of hardened steel discontinuous material.
CC670 (CA)– H10 (H05-H15)
Silicon carbide whisker reinforced alumina ceramic,Has a very high intensity.Recommended for adverse conditions turning of hard parts.
CC6050 (CC)- H05 (H01 - H10)
The composite alumina ceramic material. Has good heat resistance and abrasion resistance.It is mainly used for light load for finish machining.
CC6060 (CA)- S10 (S05-S20)
Aaron ceramics. for heat resistant hard alloy.Excellent groove wear resistance, and thus provides high security and predictability of wear.
CC6065 (CA)- S15 (S05-S20)
Aaron ceramics, first choice for all HRSA. Offer good resistance and safety. suitable for medium interrupted cutting and others.
CT5015 (HT)– K05 (K01-K10)
Non coating metal ceramic grade. with good chip resistance and plastic deformation resistance. used for finishing.